Advertisement
Installation
6 Installation
!
CAUTION! Risk of injury
The refrigerator has sharp edges. Use gloves during installation.
A
NOTICE! Damage hazard
Do not install the refrigerator in the rear of motor homes with the door facing the direc-
tion of travel.
6.1 Preparing the installation
When installing the refrigerator, note the following:
• Ensure that the floor is solid and level.
Park the vehicle horizontally for this purpose.
• The refrigerator must be installed so that:
– The refrigerator is easily accessible for service work.
– The refrigerator is easy to uninstall and install.
– The refrigerator can be easily removed from the vehicle.
• The refrigerator must be installed in a recess so that it stands secure when the vehicle is in motion. Note the
dimensions in fig. 2.
• The refrigerator must be installed with a minimum distance of 5 mm from the floor to ensure that the door can
be opened properly (fig. 1).
– Ensure that no carpets interfere with the free movement of the door.
– Avoid placing the refrigerator directly on the floor.
• The refrigerator must not be installed to the side of the air inlet and outlet vents as this leads to poor perfor-
mance and increases the power consumption of the refrigerator.
• The air inlet and outlet vents must not be covered by vehicle parts during operation (e.g. by an open door or
by attached accessories such as bicycle racks).
• Choose a location where the refrigerator is protected from drafts, excessive heat and moisture.
1
8
RUA 5308X, RUA 6508X, RUA 8508X
EN
Advertisement
