Advertisement
Installation
No. in
Description
fig. e
1
Air outlet vent with ventilation grille
2
Mounting plate
3
Flue pipe
4
T-piece
5
Adapter
f
1. Choose a position for the cut out in the outer wall. Ensure that the position is high enough so that the flue pipe
can be passed through the cut out at a 45° angle.
2. Place the cover and mark the drill holes (fig. f 1).
3. Make the rectangular cutout with edge lengths equal to the diameter of the flue duct (fig. f 2).
4. Insert the coil into the flue pipe of the refrigerator.
5. Place the T-piece on the adapter on the flue pipe of the refrigerator.
6. Direct the T-piece at an angle of 45° to the outer wall.
7. Fix the T-piece, the adapter and the flue pipe of the refrigerator with the screw (fig. e 6).
8. Mount the mounting plate (fig. g).
9. Seal the gap between the outer wall and the mounting plate with fire-resistant material (e.g. stone wool
(fig. g 2).
10. Push the flue pipe through the cut-out in the outer wall and at least 15 mm onto the T-piece (fig. g 3).
18
No. in
fig. e
1.
2.
RUA 5308X, RUA 6508X, RUA 8508X
Description
6
Screw
7
Coil
8
Flue pipe of the refrigerator
9
Outer wall of the vehicle
10
Cover
g
3.
2.
min.
15 mm
1.
EN
Advertisement
