RUA 5308X, RUA 6508X, RUA 8508X
h
11. Attach the cover to the outside of the outer wall of the vehicle (fig. h).
6.8 Installing the drain water hose
A
NOTICE! Damage hazard
• Position the opening for the drain hose so that the drain hose does not touch the
boiler housing to avoid damage to the drain hose.
• Avoid kinking of the drain water hose.
1. Drill a hole through the floor at the rear of the refrigerator (∅ 18 mm).
2. Route the drain water hose through the drilled hole and align the hose so that it can direct the water out of the
vehicle.
3. Seal the drilling hole around the drain water hose.
EN
Installation
19