Power Reductions; Power Save; Power Shut-Off - Xerox WorkCentre XE88 User Manual

Xe88qrg.bk Page 18 Thursday, February 17, 2000 4:25 PM
Note: Time periods for the Power Shut-
Off, Power Save, and Auto Clear can be
modified to meet your specific copying
needs. Refer to the Programmable
Features Settings section of this User
Guide for information about changing
these settings.
2.18
U s e r G u i d e
P O W E R R E D U C T I O N S

Power Reductions

There are two modes of power reduction:
Power Save, and Power Shut-off.

Power Save

In this mode, the fuser is maintained at a
lower heat level, thereby saving power.
The Ready Indicator will flash and the
other indicators will remain on. To copy,
press Start. The copies will be made
automatically.

Power Shut-Off

This mode saves more power than the
Power Save Mode, but requires more time
before copying can begin. When the
copier enters the power shut-off, the
Ready Indicator will flash and the other
indicators will turn off. To copy from the
power shut-off, press the Start button,
then select the desired features and press
Start again.