Options Tab Settings; Settings - Xerox CopyCentre 133 User Manual

Postscript

Hide thumbs Also See for CopyCentre 133:

Table of Contents

2 Operation with Windows 95/98/Me

Options Tab Settings

This section describes the settings in the Options tab.

Select the items in Hardware Options and change them in the Change box below. To use this

function, it is necessary to make appropriate settings in this tab.

NOTE: You can restore defaults by clicking [Restore Default].

Hard Disk - Specifies whether or not the Hard Disk (optional) is installed. If it is, set to

[Available].

Tray Options - Specifies the paper tray type installed on the machine.

When [2-Tray Unit] is selected, Tray 3 and Tray 4 can be used.

When [2-Tray Unit (High Capacity)] is selected, Tray 3 and Tray 4 can be used as the high

capacity feeder.

Finisher - Specifies if the Finisher (optional) is installed. If it is, set to [Available].

Paper Size Setting - Specifies the paper size group for different areas to enable the selection

of paper size common to that location.

Switch Paper Size (8K/16K) - Indicate your language preference to enable the set of 8K and

16K paper size that is best suited to your needs.

Memory - Specify the amount of printer memory.

Xerox WorkCentre/WorkCentre Pro 123/128/133 PostScript® User Guide

Table of Contents