Xerox 4112 User Manual page 96

4. W i n do w s 2 00 0 /X P a n d W i nd ow s S e r v e r 2 00 3
Gutter
Margin Shift
Printer Status
4- 2 6
Select this box to add a Gutter Margin.
Clicking this button displays the "Margins" dialog box. Enter the
position and the extent of the margin shift on the paper.
• Position - Specifies the margin shift (binding margin)
position. The margin can be added to the left, right, top, or
bottom of the paper. The margin positions change according to
the paper orientation.
KEY POINT: If setting other than "Off" is selected in "Print
Booklet" on the "Layout" tab, only "No Shift" will be available in
"Position."
• Side 1 - Specifies the margin on side 1 of the paper when
using the "Margin Shift" function. You can specify any value
between 0 and 50 mm in units of 1mm using the keyboard or
the up and down arrows.
• Side 2 - Specifies the margin on side 2 of the paper when
using the "Margin Shift" function in 2-sided printing.
– The margin shift position for side 2 is automatically set so
that the margin is added to the same edge as side 1.
– You can specify any value between 0 and 50 mm in units
of 1mm using the keyboard or the up and down arrows.
Open a Web browser and connect to CentreWare Internet
Services for the printer to display the printer status.
To use CentreWare Internet Services, you must set the Internet
Services on the printer to "Start."
NOTE: This feature cannot be used when the printer is used as a
local printer.
X e r o x 4 11 2/ 4 12 7 P os t S c r i pt U s er G ui d e