Table of Contents
Advertisement
4 of its length. Make sure that it does not
touch the tray underneath and that it does
not protrude from the food.
In order for the probe to measure the
core temperature of the food precisely,
its tip must not be in contact with bones
or fat.
The minimum recommended oven
temperature when cooking using the
probe is 120°C, unless slow cooking is
used.
Cooking using the temperature probe
Without preheating:
4. Insert the plug of the probe into the socket at
the side, using the probe to open the cover.
5. Close the door.
6. Set the required cooking function.
7. Set the required temperature.
8. Cooking starts and after a few seconds, the
display shows the default target temperature
75 °C
.
56 - USE
9. Use the
and
target temperature to a value between the
minimum and a maximum.
• Minimum target temperature: 45°C.
• Maximum target temperature:
99°C.
• If the temperature read is more than
99°C, "Hi°C" appears on the
display.
10. Press the
button to confirm the
temperature and start the function, the actual
temperature of the food appears on the
display.
11. Cooking ends when the set value is reached
and "END" appears on the display.
Cooking will now continue until the
instantaneous temperature measured by the
probe is the same as the target temperature set
by the user.
With preheating:
1. Set the oven to manual (see "Using the
oven").
2. After preheating, put the tray, on which the
food has been placed with the probe in
position, into the oven.
3. Insert the plug of the probe into the socket at
the side, using the probe to open the cover.
4. Close the door.
5. Set up the cooking parameters using the
temperature probe as indicated in steps 5,
6, 7 and 8 in the previous section.
If the probe is removed during cooking,
"END" appears on the display. If you
wish to continue cooking in manual
mode, press the
The probe is not detected by the
function if it is inserted with the oven
switched off.
The probe will not be detected if a
cooking function and the relative
temperature has not been set.
The probe temperature has to be reset if
you change the function during cooking.
buttons to regulate the
button.
91477A753/C
Advertisement
Table of Contents
