Motorola iDEN i530 Field Service Manual page 44

Digital multi-service, data-capable portable
Hide thumbs Also See for iDEN i530:
Table of Contents

Advertisement

BASIC LEVEL CHECKS AND SELF TESTS: Self-Test Procedures
2.
Press
3.
Scroll left or right to set the contrast.
4.
Press
Language — sets the language that your phone displays.
Phone Calls Features
The Phone Calls menu controls how your phone handles phone calls:
SetLine — sets phone line 1 or phone line 2 as the active line for outgoing calls.
AnyKeyAns — If this feature is on, you can answer calls by pressing any key on the keypad.
AutoRedial — sets your phone to automatically redial calls you make when the system is busy.
CallWaiting — To turn off Call Waiting for the next call you make or receive:
1.
From the main menu, select Settings > Phone Calls > Call Waiting.
2.
Press
3.
Scroll to Off.
4.
Press
Auto Ans — sets your phone to automatically answer an incoming call after a specified number
of rings. When this feature is on, the phone answers by connecting you to the caller; it does not
send the call to voice mail, unless you are out of coverage or on the line.
Minute Beep — causes beep to sound every minute of an active call.
CallDuration — causes the duration of a call to appear on the phones display when the call
ends.
TTY — lets you use your phone with a TTY device. To use your phone to make phone calls
using a teletypewriter (TTY) device:
1.
Connect one end of a 2.5 mm cable into the audio jack on your phone. Connect the other
end of the cable to your TTY device.
2.
Make sure that your phone's TTY feature is on and select the TTY mode you want to use.
3.
Use your phone to enter phone numbers and make calls.
Notifications —To control whether your phone sounds message notification tones while you
are on phone calls:
1.
From the main menu, select Settings > Phone Calls > Notifications.
5-8
B
to change.
B
.
B
to change.
B
. CallWaiting is turned back on when you end the call.
68P80400P65-O

Advertisement

Table of Contents
loading

Table of Contents