Playing Back The Song - Kawai Heritage 200 Classic Instruction Manual

4 | Playing back the song
This function allows you to select and play back a song stored in one of the five song memories.
The following example describes a situation in which a song has been recorded in each of the five
"Ste 1) While holding down the PLAY/STOP button, press the SONG button where the
| a | _s "x 3- | om | | | = 3 = 2)
ORAAN ORGAN CHORD PHONE
the PLAY/STOP button
(Step 2.) Release both buttons and SONG 4 will play back.
= = "
ORGAN ORGAN CHORD PHONE
song you want to hear has been recorded.
= = a =
a \ pro
For example, pressing the JAZZ ORGAN (SONG 4) button will flash the LED to
Relationship maece the oa status and its epee renns LED
memories.
song 1 2 5 track 1 2
PIANO 1 PIANO 2 E. PIANO JAZZ CHURCH HARPSI- VIBRA- STRINGS PLAV/STOP REC
i
LOWER BASS
While holding down
show that SONG 4 is selected.
ce 1 <n track 1
PIANO 1 PIANO 2 E.PIANO JAZZ CHURCH HARPSI- VIBRA- a PLAY/STOP REC
LOWER BASS
While holding down
In the case above, the PLAY/STOP button
SONG 1, 2 (LED is lit) Indicates that a song has been
recorded in these memory
locations.
This song memory has been
selected for playback or for
recording a new song.
SONG 3 (LED is flashing)
SONG 4, 5 (LED is flashing) No song is recorded here.
TRACK 1 and 2 LEDs indicate the part status of the selected song (SONG 3).
TRACK 1 (LED lit or flashing) Song data for SONG 3 has
been recorded on this track.
TRACK 2 (LED turns off) No song data has been
recorded on this track.
14