Kawai Heritage 200 Classic Instruction Manual page 40

C. Turning MULTI TIMBRE on and off
(Step 3 )
Normally, the procedure described above is used to transmit or receive data on a
set MIDI channel (any one of 1 through 16). However, by turning the MULTI TIM-
BRE function on you can receive more than one MIDI channel and simultaneously
play a different type of timbre on each one. Using this feature, you can use a
sequencer like Kawai's DRP-10 Digital Recorder/Player or ALR-20 Accompaniment
Center to assemble performances with a number of timbres (MULTI TIMBRE) on
the piano.
There are two parameters to which the MULT! TIMBRE mode can be set. MULTI
TIMBRE 1 produces the preset sound directly corresponding to the channel of the
MIDI signal received. MULTI TIMBRE 2 lets you set which sound will be on or off
for each channel of signal received.
Make sure that the piano is in the programming mode.
Press the PIANO 2 button to set the LED above the it flashing.
song 1 3 4 5 track 4
7 @ =a ez a a —_— = =
ORGAN ORGAN CHORD PHONE
WOOD ELECTRIC SLAP
LOWER BASS
MULTI TIMBRE mode on and off.
Pressing the white key on the extreme right turns on MULT! TIMBRE 1, the white
key second from the extreme right turns on MULTI TIMBRE 2, and the black key
turns off MULTI TIMBRE.
MULTI TIMBRE
1-ON
MULTI TIMBRE OFF
MULTI TIMBRE
2-ON
When MULTI TIMBRE is off and a MIDI signal is received, the preset sound cur-
rently selected will produce the sound.
36