Tronic TLG 1000 C5 Operating Instructions Manual page 33

Disposal of the packaging
GB
Operating components
LEDs (Operating status indicators)
Loading slots for types AAA/AA/C/D (loading slots 1 to 4; see fold-out page)
2
3 Loading slots for 9 V blocks (loading slots 5 and 6; see fold-out page)
Display
4
USB Output
5
Handling and operation
Charging batteries
30
The packaging protects the device from transport damage. The packaging
materials are selected from the point of view of their environmental friendliness
and disposal technology and are therefore recyclable.
The recirculation of packaging into the material circuit saves on raw material
and reduces the amount of waste generated. Dispose of packaging material
that is no longer needed as per the regionally established regulations.
NOTICE
► If possible preserve the device's original packaging during the warranty
period so that, in the event of a warranty claim, you can package the
device ideally for its return.
In this chapter you will receive important information for the handling and opera-
tion of the device.
♦ Place the device on a smooth, level and slip resistant surface.
♦ Compare the technical details with those of your power supplier. If they
match, insert the plug into a mains power socket. The LEDs light up in red
three times. The battery charger is now ready for use.
♦ Insert the batteries into the charging slots. Press the 9 V Block batteries
into the charging slot until they audibly engage.
NOTICE
► 1 to 8 batteries can be individually charged:
- 4 x Type C or Type D batteries in the charging slots 1 to 4, with additionally
2 x Type 9 Volt Block batteries in the charging slots 5 and 6
or
- 6 x Type AA or AAA in the charging slots 1 to 4 and additionally
2 x Type 9 Volt Block batteries in the charging slots 5 and 6.
TLG 1000 C5