Using The System - X10 Orca2000 Owner's Manual

USING THE SYSTEM

Console Indicators
Zone indicators - The Console displays
the status of its 16 zones (8 at a time).
These zone indicators are only used if
you add optional Door/Window Sensors
or Motions Detectors (sold separately)
and are explained in the instructions that
accompany them.
Battery Light - Indicates that the
battery in the Console is low and needs
replacing.
Monitor Light - Indicates that you need
to call ORCA Monitoring Service at 1-
800-FOR-ORCA (1-800-367-6722).
Armed Light - Indicates that the unit is
armed and ready be activated from
optional sensors.
Sounding the PANIC Alarm
Note: the Console does NOT need to
be armed to respond to Panic Buttons
or the KR16A Keychain Remote. Arming
is only used with other accessories that
are sold separately.
Panic Buttons
When you press the red PANIC button
on the KR15A Panic Button the SH10A
siren that you installed earlier chimes.
If you hold the button for about 4
seconds the SH10A siren sounds a loud
95 decibel alarm. The Console sounds
its siren, flashes lights connected to
Lamp Modules (set to A-1) and calls
ORCA Monitoring Services for help.
12
ORCA Monitoring Services will then call
you back to verify that it wasn't a false
alarm. If it was a false alarm just give
the operator your password and ORCA
will not call the Police.
IMPORTANT:
If there is someone there who forces
you to tell ORCA your password, tell
them the wrong password, they will then
dispatch the Police.
Keychain Remote
The KR16A Keychain Remote operates
the same way as the KR15A Panic
Buttons.
After an Alarm
When you press STOP on the Keychain
Remote the siren stops but the lights
that were flashing stay on. The Console
will still call ORCA if it had already
started to do so. Do not call ORCA to
tell them it's a false alarm. Wait for them
to call you. Otherwise you will prevent
them from getting through when they
call you to ask you for your password. If
they can't get through, they will dispatch
the Police.
The ARMED indicator flashes to
indicate that an alarm has happened.
Press PANIC then STOP on the
Keychain Remote to turn off the flashing
ARMED indicator.