X10 PR511 Owner's Manual
  1. Manuals
  2. Brands
  3. X10 Manuals
  4. Security System
  5. Motion Monitor PR511
  6. Owner's manual

X10 PR511 Owner's Manual

Powerhouse motion detector
Hide thumbs Also See for PR511:
Table of Contents

Advertisement

Quick Links

POWERHOUSE n
MOTION DETECTOR MODEL PR511
OWNER'S MANUAL

Advertisement

Table of Contents
loading

Related Manuals for X10 PR511

Summary of Contents for X10 PR511

  • Page 1 8s . POWERHOUSE n MOTION DETECTOR MODEL PR511 OWNER’S MANUAL Home Automation Systems, Inc. (800) SMART-HOME (949) 221-9200 http://smarthome.com...

  • Page 2: Table Of Contents

    A QUICK LOOK AT YOUR MOTION DETECTOR I N T R O D U C T I O N Your X-10 POWERHOUSE Motion CONTENTS Detector gives your home a “lived-in” when you are away, The built-in look A Quick Look ........infrared sensor automatically turns on Covered Area ........

  • Page 3: Covered Area

    COVERED AREA INSTALLING THE MOTION DETECTOR Position the Motion Detector so that a moving object cuts “across” its beams, not directly CHOOSING A LOCATION Cautious: towards them. You must connect your Motion De- You must install your Motion Detector Motion Path Motion Path tector to 120 volts AC.

  • Page 4: Assembling The Motion Detector

    MOTION ASSEMBLING THE MOTION DETECTOR INSTALLING THE DETECTOR 1. Screw the base of each lamp holder You can install the Motion Detector in a Connect your Motion Detector’s 4. Lock the sensor head into place using into the outer holes of the mounting wall box that is powered all the time or while wire to the house wiring’s the locking ring.

  • Page 5: Operation Settings

    ADJUSTING YOUR MOTION DETECTOR OPERATION SETTINGS RANGE CONTROL DUSK CONTROL Walk around the covered area. This procedure adjusts the aim of your Motion Detector’s sensor head and Whenever you move, the floodlights come on and remain on until 6 sec- DUSK control adjusts the light lev- floodlights for best coverage.

  • Page 6: Controlling Other Lights

    CONTROLLING YOUR MOTION DETECTOR CONTROLLING OTHER LIGHTS SETTING THE You can use any X-10 Controller to turn Note: When you first install an X-10 Your Motion Detector can turn on up START CODE your Motion Detector on and off. Set Appliance Module it might to eight other lights or appliances con- already be...

  • Page 7: This Is

    This is X-10 POWERHOUSE Mini Timer (MT522) Lamp Module (LM465) Instantly controls up to eight X-10 mod- Can be turned on and off and even ules and programs up to four modules to dimmed from X-10 controllers. Rated for turn on and off at specific times. Can 300W.

  • Page 8: Troubleshooting

    TROUBLESHOOTING POWER INTERRUPTIONS INTERCOM SYSTEMS If the floodlights do not turn on. If your Motion Detector does not con- trol any modules. Intercom systems that send signals over When the power comes back on after a Be sure that the Motion Detector has power failure, your Motion Detector re- your house’s electrical wiring can inter- power.

  • Page 9: Important Notes

    Important Notes If the floodlights connected to your Motion Detector Light Control turn on but do not turn off, follow these steps: 1. Set RANGE control to MAX. 2. Set DUSK control to LIGHT. 3. Set TIME DELAY to 0.1. 4.

This manual is also suitable for:

Powerhouse pr511

Table of Contents