Table of Contents
Advertisement
TROUBLESHOOTING
PROBLEM
Lights will not turn on or off from the
LIGHTS ON or LIGHTS OFF buttons
on the Keychain Remote, Panic Buttons,
or Console.
If appliances turn off during an alarm.
If the battery indicator on the Console
is on.
16
SOLUTION
• Be sure you set House and Unit
codes on the module(s) to the same
letter and number as downloaded to
the Console (default is A-1).
• Be sure the light you are trying to
control has its on/off switch in the on
position. Be sure its bulb is good.
• Plug the module into another outlet
near the Console.
• Check that the battery indicator on
the Remote Control comes on when
you press a button. Replace battery
and re-install remote if necessary.
• Check the House and Unit codes for
the Panic Button (default A-1). See
page 13.
The system flashes lights by repetitively
transmitting A-1 on/off. Therefore any
appliances (connected to Appliance
Modules) which were on at the time of
the alarm set to A-1 will turn off.
If you do not want this to happen, set
the Appliance Module(s) to a different
Housecode than A-1.
Replace the Console's battery. A 9V
alkaline battery provides approximately
12 hours of back-up. Replace battery at
least once a year.
Advertisement
Table of Contents
