Ontrolling An Ir Mini Controller - X10 MK19A Owner's Manual

C C C C C
ONTROLLING ONTROLLING ONTROLLING ONTROLLING ONTROLLING AN AN AN AN AN
IR M IR M C C C C C (IR543) (IR543)
IR M IR M IR M (IR543) (IR543) (IR543)
INI INI INI ONTROLLER ONTROLLER ONTROLLER
INI INI ONTROLLER ONTROLLER
If you already own an IR Mini Controller,
you will need to change the X10 Home
Automation code in the remote to use it.
The code for standard X10 Home
Automation is 013. The code to control
the IR543 Mini Controller is 014. To
change the code:
1. 1. 1. 1. 1. Press and hold
SETUP until the LED
indicator lights
steadily. Release
the SETUP button.
2. 2. 2. 2. 2. Press and release
the X10 button.
3. 3. 3. 3. 3. Enter 014 to
control an IR Mini
Controller, 013 for
standard X10
control. The LED
turns off after the
last digit entered.
Note: In most cases, you will not need to
use an IR543 Mini Controller to receive
commands from the Mouse Remote - the
Transceiver Module (or any X10 Security
System) does this for you and has the
added advantage of working through
walls. It also has the advantage of letting
you control up to 16 X10 Modules - i.e.
with a Transceiver when you press 1-6-
ON you turn on Module number 16. With
an IR543 when you press 1-6-ON you turn
on Modules 1 AND 6. The IR543 can only
control 10 Modules (1-9 plus 0=10). You
cannot control the IR543 Mini Controller
and the Transceiver Module at the same
time from the X10 button, but you can
program an IR Mini Controller under the
AUX button.
4 4 4 4
4 4 4 4 4 4
E E E E E
XP XP XP XP XPANDING ANDING ANDING ANDING ANDING
S S S S S
YOUR YOUR YOUR YOUR YOUR YSTEM YSTEM YSTEM YSTEM YSTEM
The products illustrated below represent
just a few of the wide range of X10
compatible products you can choose
from to expand your Home Automation
system. They are available from electrical
outlets, department stores and mail order
catalogs.
X10 Home Automation products also
integrate with X10 security systems, so
you can use the security remotes that
come with them to control macros and
flash lights when the security system is
tripped.
Check out our WEB Site at: Check out our WEB Site at: Check out our WEB Site at: Check out our WEB Site at: Check out our WEB Site at:
www.x10.com
for more information on these and many for more information on these and many for more information on these and many
for more information on these and many for more information on these and many
other X10 products. other X10 products. other X10 products.
other X10 products. other X10 products.
The Dual Floodlight Dual Floodlight Dual Floodlight Dual Floodlight Dual Floodlight
Motion Detector Motion Detector PR511 PR511
Motion Detector PR511 Motion Detector Motion Detector PR511 PR511
turns on at dusk and/
or when it detects
movement, and sends
X10 signals to control
other Modules, or
trigger ActiveHome
macros.
The Thermostat
Setback Controller
TH2807 mounts below
your thermostat to
reduce the room
temperature at night or
at the times you set to
save energy. No wiring
needed to your existing
thermostat.
Replace your existing wall switches with
the Wall Switch Module WS467.
Installs like a regular dimmer. On/Off
and Bright/Dim functions. Other
models available for 3-way lighting.
Replace an existing AC wall outlet
with the Receptacle Module
SR227. Has one 15A/1800W
controlled outlet and one outlet
which is always on.
4 5 4 5
4 5 4 5 4 5