Table of Contents
Advertisement
Section 7
7.11 LUBRICATION
GREASE FITTING LUBRICATION CHART
LOCATION
1 - Caster Wheel Pivot
2 - Caster Wheel Bearings
3 - Cutter Deck Bell Cranks
4 - Cutter Deck Spindles
5 - Cutter Deck Pusharms
*Compatible Greases:
* PROCEDURE: Remove grease cap, part number 484195. Remove plug, part number 482028-01, and install grease
zerk. Apply grease to the fitting until new grease appears at the top of the caster extension. Remove the grease zerk and
reinstall the plug. Reinstall the grease cap. Special tool, part number 47007, is recommended for use in the installation
of the grease cap.
LUBRICATION INTERVAL
500 Hours / Yearly
100 Hours / Monthly
100 Hours / Bi-Weekly
40 Hours / Weekly
100 Hours / Bi-Weekly
Scag Premium Chassis Grease p/n 486257
Scag Premium Spindle Grease p/n 486258
Chassis Grease
Chassis Grease
Chassis Grease
Spindle Grease
Chassis Grease
37
LUBRICANT
R
NO. OF
PLACES
2
2
4
2 / 3
2
Advertisement
Table of Contents
