Bosch MRC23EVSK Operating/Safety Instructions Manual page 26

BM 2610004573 03-12_BM 2610004573 03-12 6/26/12 7:16 AM Page 25
EDGEFORMING DUST
EXTRACTION
This dust extraction hood (optional
accessory) is used for dust collection when
edge-forming
You can attach the edge-forming hood in
several places according to your needs or
preferences. This hood is attached using two
of the screw holes on the router base that are
used to attach the router's sub-base. Choose
the desired location for the hood. Loosen and
take out the two screws from the router base
and attach the dust extraction hood — over
the router's sub-base — using the screws
provided with the hood. Securely tighten the
screws.
FIG. 28
PLUNGE BASE
Router
Sub-Base
4mm x 16mm Screw
Router Dust Extraction
FIG. 27
Workpiece
FIG. 29
OTHER BASES
4mm x 16mm
Screw
Dust
Extraction
Hood
-25-
Edge
Dust Extraction Hood
Dust
Extraction
Hood
4mm x 16mm
Router
Sub-Base
4mm x 16mm
Screw
Screw