Table of Contents
Advertisement
MAVERICK
325X
®
PRODUCTIVITY METRICS
The Productivity Metrics screen provides information and statistics
on how the machine is being utilized.
Five statistics of the machine are monitored: Arc Hours, Auxiliary
Hours, Utilization Percent, Standby Hours and Fuel Saved w/ Auto-
Start.
Arc Hours is the time spent using the machine for welding.
Auxilliary Hours is the time spent using the auxiliary power on the
machine.
Utilization Percent represents how effciently the machine is being
used. It shows the percentage of time the machine is being loaded
with respect to the total hours on the engine.
Standby Hours is the time the machine was running while not
being loaded.
Fuel Saved w/ Auto-Start is the amount of fuel in US gallons that
has been saved due to the Auto-Start feature.
To view information regarding one of the monitored parameters,
rotate the knob until the desired item is highlighted in red. The
bottom of the screen shows the value of the parameter on the
longer left side portion, and located in the bottom right corner is
the engine hours.
In order to reset any of these metrics, press and hold the knob on
the selected parameter for 5 seconds.
Productivity Metrics
Arc
Auxiliary
Hours
Hours
Press and hold knob to reset:
70.1%
B-23
OPERATION
Productivity Metrics
Engine
Fuel
Utilization
Saved w/
Running
Percent
Auto-Start
70.1%
Standby
Gal
Hours
380.5
Hrs
?
Advertisement
Table of Contents
