17.5
Adjusting the idle speed
Warning
Danger of accidents The engine may go out spontaneously if the idle speed is set too low.
–
Set the idle speed to the specified value. (Your authorized KTM workshop will be glad to help.)
Activating STANDARD mapping:
–
Press button
Guideline
Engine speed
The indicator lamp
STANDARD – balanced response
Info
F03762-10
Traction control can be activated additionally using
TC button
Activating ADVANCED mapping:
–
Press button
Guideline
Engine speed
The indicator lamp
ADVANCED – direct response
Info
F03763-10
Traction control can be activated additionally using
TC button
–
Run the engine until warm.
The cold start button is deactivated – The cold start but-
ton is in its basic position. (
Danger
Danger of poisoning Exhaust gases are toxic and inhal-
ing them may result in unconsciousness and death.
–
Always make sure there is sufficient ventilation
when running the engine.
–
Use effective exhaust extraction when starting or
running the engine in an enclosed space.
–
Adjust the idle speed by turning idle speed adjusting
1
screw
.
Guideline
Idle speed
Service hour counter with revolution counter
(A54012920100)
W00313-10
TUNING THE ENGINE 17
1
.
< 4,000 rpm
A
lights up.
3
.
2
.
< 4,000 rpm
B
lights up.
3
.
p. 20)
1,800 ... 1,900 rpm
129