Other Options Menu - Eizo CuratOR EX5841 Installation Manual

Commissioning

2.9 Other Options menu

2.9 Other Options menu
Function
OSD Settings
LED Brightness
LED Timeout
16
Values
Horizontal 0 - 219
Vertical 0 - 57
Transparency 64 - 255
Default:
Horizontal 206
Vertical 55
Transparency 255
Bright
Dimmed
Default: Dimmed
No Timeout
Timeout (min) 1
Default: No Timeout
Description
Setting the position and transparency of the
OSD menu
Horizontal and vertical coordinates establish the
position of the OSD menu.
Use "Transparency" to change the transparency
of the OSD background.
Note: Individual OSD settings can be saved for
every preset.
Set the brightness of the operation LED.
You can lower the brightness of the operation
LED to prevent interfering stray light.
Note: The brightness of the operation LED in-
creases again automatically when an error occurs
in the monitor. The color of the operation LED
then indicates a possible cause of the error.
Setting the operation LED timeout
You can set a set wait time (in minutes) after
which the operation LED is switched off to prevent
interfering stray light.
Note: The operation LED switches on again auto-
matically when an error occurs in the monitor. The
color of the operation LED then indicates a possi-
ble cause of the error.
Installation Manual, 06/2021
CuratOR EX5841