Eizo CuratOR EX5841 Installation Manual page 14

Commissioning
2.7 Picture Layout menu
Function
Position / Size (PiP) H-Position
Color Gamut
CAL Switch
"Color" Menu
Note
The "Color" menu settings can be saved separately for each window.
Function Values
Brightness 0 - 100
Default: 50
14
Values
Default: 80
V-Position
Default: 93
H-Size
Default: 103
V-Size
Default: 125
Native
sRGB
BT.2020 Emulation
Default: depends on the
selected preset
Gamma 2.0
Gamma 2.2
Gamma 2.4 nat
Gamma 2.4
DICOM
Default: Gamma 2.4 nat
or depending on the se-
lected preset
Description
Set brightness
This function can be used to change brightness, for example,
to adapt the black value of the display.
Description
Establishing PiP window geometry
Note: The function is displayed only when a PiP
window is selected.
You set the position and size of the picture-in-pic-
ture display here. The zero position is the upper left
corner of the window.
Sets the active color gamut.
Selecting the Look Up Table (LUT)
The LUT determines the gamma curve of the se-
lected window. By using a different LUT for exam-
ple, you can highlight specific grayscale levels.
The LUT names displayed provide a brief descrip-
tion of the model for which the LUT is valid.
Note: Select the DICOM LUT to view radiographic
images.
CuratOR EX5841
Installation Manual, 06/2021