Eizo RadiForce LS560W Instruction Manual page 23

8mp 56" color flat panel monitor

Table of Contents

Mounting the device

The monitor has a VESA adapter/400 x 400 mm.

Since the screws are of particular importance for the installation, observe the following:

Fastening screw specifications

Number

Thread

Strength

Insertion depth

Tightening torque

● The insertion depth of the fastening screw refers to the length of the part of the screw that

enters the fixing hole in the monitor.

– When calculating the total screw length, pay attention to the thickness of the support.

● The tightening torque is highly dependent on the material of the suspension unit.

– Ensure that the material of the suspension unit is not damaged during assembly.

● Make sure when installing the monitor that the adapter is designed for 4-fold safety

(monitor mass is 47 ± 2.5 kg).

● An installed stand must be sufficiently stable such that tilting (up to 10°) does not result in

toppling of the device.

● Mounting units, e.g. a stand or wall bracket, must be tested and approved by the

manufacturer for the weight to be supported.

– Use the manufacturer's mounting units since these satisfy the required conditions.

● For installation without Display Ceiling Suspension, only use the following wall mount and

stands:

– FWM6300, wall mount - Order No.: 6GF6988-8BA02

– FST5600, stand - Order No.: 6GF6988-8BA01