Eizo RadiForce LS560W Instruction Manual page 13

8mp 56" color flat panel monitor

Table of Contents

CAUTION

Touching the screen surface can result in brief disturbances to the image

Due to mechanical pressure or electrostatic discharging, touching the screen can result in

brief disturbances to the image.

Only switch on cold displays following their adaptation to room temperature

If the display is brought into a room with a higher or rising temperature, condensation is

formed inside and outside the unit. In such a case, do not switch on the display until the

condensation has evaporated. The display will otherwise be damaged.

What to do if the display is faulty

If the following conditions exist, the display must be disconnected from the power supply

and checked by qualified personnel:

• Damage to the plug or power cable.

• Following the entry of liquid into the unit.

• If the unit has been exposed to moisture.

• If the unit does not function or if you cannot eliminate a fault using the instruction

• If the unit has been dropped and/or the housing damaged.

• If the unit smells of burning or produces peculiar noises.

Information for installations in the USA and Canada

Molded power supply plugs must comply with the requirements for "hospital grade

attachments" CSA Std. C22.2 No. 21 and UL 498.

Note for installations in China

Only use power cables approved for China. These power cables are identified by the labels

"CCC" or "CQC".