Table of Contents
Advertisement
TOE KICK INSTALLATION
1
Long hem edge
FRONT VIEW
2
CROSS SECTION PROFILE VIEW
3
FRONT VIEW
14
Insert both foot covers into the
toe kick ensuring the long hem
edge is facing the inside of the
product.
Align the toe kick with side
panels of the freestanding
cooker.
Clip into place by rotating and
pushing the bracket down
over the freestanding cooker
structure.
Check toe kick is flush with the
freestanding cooker and secure
using 2 screws.
LEVELLING THE FREESTANDING COOKER
1
PROFILE VIEW
2
PROFILE VIEW
PRIOR TO FINAL POSITIONING
Ensure the doors and toe kick panel are securely in place, if removed previously.
z
Ensure any backguard is fitted prior to final positioning. Refer to "single-phase
z
connection illustrated" for the backguard options.
Ensure all electrical and gas connections have been done as per instructions.
z
Ensure flooring and adjacent cabinetry are also level. To achieve a flush fit of the
z
freestanding cooker to adjoining countertops, it will be necessary to have level cabinets
(front to back, and left to right across opening of the freestanding cooker).
To expose both front feet,
slide the interlocking foot
covers out of the way.
Turn feet to adjust the height.
Replace both sets of covers,
ensuring each set locks
together.
Advertisement
Table of Contents
