Table of Contents
Advertisement
LED backlight
The LS580W is equipped with a white LED backlight. This means that a long service life can
be achieved even with high luminance.
Perfect picture reproduction thanks to LCD technology
Distortions in the image geometry do not occur with LCD technology.
The LS580W provides a flicker-free picture even with low refresh rates. The monitor thus
fulfills even the strictest ergonomic requirements.
The monitor has a TFT monitor module with a very wide viewing angle. The use of state-of-
the-art LCD technology allows a high luminance.
Fully Automated Stability
The LS580W has an integrated stability system (ISS). The ISS ensures constant luminance
using a built-in light sensor in the center of the backlight.
Increased failure safety
Great attention was applied to increased failure safety in the electronic design of the moni-
tor. Two independent circuits are used for the backlight power supply, and a partial image is
still displayed should one video channel fail.
Communication interface
The communication interface is routed via the DVI or USB connection. The operating states
of the monitor can be read and switched via the interface, e.g. in Power Safe Mode. In par-
ticular, the monitor functionality can be queried using the interface.
Even distribution of luminance
The monitor is equipped with luminance correction electronics to achieve luminance unifor-
mity This electronics is calibrated in the factory. Recalibration is possible.
Preset Look Up Tables
The LS580W is precalibrated at the factory. A total of five reality-based Look Up Tables
(LUTs) have been defined. The LUTs simplify installation and maintenance, and the monitor
can be adapted to the local lighting conditions with a click of the mouse. Graphics settings
are also retained, for example after changing the graphics card or PC, and the monitor does
not have to be calibrated.
RadiForce LS580W
Instruction for Use, 02/2014
3.2 Monitor performance features
Description
13
Advertisement
Table of Contents
