Use The Product - Fluke 154 User Manual

Users Manual

Use the Product

The Modem and App come paired to each other. To use a different modem,
pair the new Modem to the App. See
The Device manufacturer develops Device Descriptions (DD) for their products
and stores them in a DD Library. The latest DD Library is installed on the Tablet.
The menus, data, status, and configurations will be different based on the
Device DD.
When updates to the App or DD Library are available, Fluke emails a link to the
email address used to register the Product. To make sure you receive the
update emails, verify the email address in the App Registration submenu is
correct.
The Tablet and Modem are not rated for intrinsic safety and should only be
connected in a safe area.
Connect the Modem, Device, and Loop Power Supply before you turn on the
Modem to improve initial communication reliability.
1. Turn off the Tablet and the Modem.
2. Attach the clips to the wires of the Modem.
3. Connect the clips to the Device across the 4 to 20 mA connection on the
Device.
Although the communication signal is available anywhere along the 4 mA to
20 mA wire, it is often easiest to connect the Modem to the terminals of the
Device. Figure 2
internal 250 Ω resister, as the Loop Power Supply.
Wireless
XWWarning
Note
shows the System Diagram with a Fluke 754, with an
Devices.
12