Pc Connection - Panasonic Palmcorder PalmSight PV-L779 Operating Instructions Manual

PC Connection
Digital PhotoShot Software
A live or captured image can be transferred to your PC (Personal Computer).
System Requirements for Digital PhotoShot
* IBM PC/AT or compatible.
* Microsoft Windows*95 or Windows*98.
* Intel® Pentium? Processor.
* RAM: 16 MB or more
* 2 MB of available hard-disk space.
* 256 color monitor (full color recommended).
* 3.5 inch 1.44 MB floppy disk drive (for installation).
* RS-232C serial port (D-Sub 9-pin). An adaptor (D-Sub 9-pin male to
a D-Sub female) is required for a D-Sub 25-pin.
* Mouse or other pointing device.
Amen
Connect Camcorder PC jack to the serial
port on your PC (Personal Computer)
using the supplied PC connector cable.
Refer to PC or Windows manual to identify Note:
which COM port to be used for connection. — « Be sure to turn PC off before connection
for properly image transfer.
* After Camcorder and PC are connected
by starting up the software included,
video recording is not possible.
Before you begin...
* Turn your PC off. `
* Set Camcorder POWER to OFF.
jeige
. RS-232C Serial Port
(Default is COM1)
(D-Sub 9-pin)
PC Connector
PC Connector cable
(supplied)
61