Panasonic Palmcorder PalmSight PV-L779 Operating Instructions Manual page 42

Digital E.I.S.
Digital Electronic Image
Stabilization (E.1.S.
Helps stabilize picture when recording in
unstable situations.
SS
e:
e
Before you begin...
* Connect Camcorder to power source.
* Set POWER to CAMERA.
3
Slide DIGITAL SELECT to EIS.
Press EIS to display "EIS" in the
EVF. .
* The shutter speed auto-adjusts from
1/80 to 1/350 according to
brightness.
* Use High Speed Shutter (page 35)
if needed. Shutter speed setting
remains after EIS is canceled.
Press EIS again to cancel when not
in use.
E.1.S. may not function during...
* exireme Camcorder movement.
* recording of subject with distinct
horizontal or vertical stripes.
* low light situations (EIS indicator
flashes).
intense fluorescent lighting situations.
* recording of very fast motion.
Note:
* if "NOW IN DIGITAL WIPE" is
displayed when EIS is pressed,
DIGITAL SELECT is currently in
DIGITAL WIPE mode and the Digital
E.I.S. feature is not available.
42 For assistance, call 1-800-211-PANA(7262)