Panasonic Palmcorder PalmSight PV-L779 Operating Instructions Manual page 44

Security Mode.
Motion Security
A
Ob
DOWN
Dy
DISPLAY MENU
Motion Security may mistakenly start
when:
* background is plain, like a white wall, or
has distinct vertical, horizontal or slanted
stripes, like a venetian blind.
* brightness suddenly changes.
Motion Security may not start when:
* motion is very slow or fast.
* moving object is very small.
* motion occurs only in 1 corner of viewing
area.
* in poor lighting (in this case, MOTION
SECURITY flashes).
* background is plain, like a white wall, or
has distinct horizontal or vertical stripes.
Note:
* Security recording starts if Camcorder is
bumped or repositioned.
* This feature is not available during normal
recording.
* While in Motion Security stand-by, the
following functions are not available:
Record/Pause, Stand-by mode, Digital
E.1.S., Time Lapse, Message, Auto Fade,
Digital Fade, Digital Filter.
Before you begin...
* Connect Camcorder to power source.
Use AC Adaptor for longer recordings.
* Insert cassette with record tab (page 14).
* Set POWER to CAMERA.
* Securely position and aim Camcorder.
1 Slide DIGITAL SELECT to EIS.
2 Press MENU for MENU mode.
Press UP A or
PAGE 2/2
A
TIME LAPSE ; OFF
DOWN Y to select] wessace : OFF
; OFF
VIDEO EFFECTS : FADE
BLACK
ERA.
SELECT: PUSH v/A KEY
SET : PUSH DISPLAY KEY
END : PUSH MENU KEY
3 Press DISPLAY for SECURITY
MODE menu. Press UP A or
DOWN Y to --- SECURITY MODE ---
select [ese OFF
Press DISPLAY AUDI
. MOTION AUDIO
to confirm entry.
SELECT: PUSH ¥ia KEY
SET : PUSH DISPLAY KEY)
4 Press MENU for Motion Security
stand-by mode. (If cassette is not
inserted, "(es]" will flash.)
MOTION
SECURITY
STAND-BY
* Recording will start about 3 seconds
after motion is detected.
* Date and time are recorded if
displayed in EVF (page 20).
* Recording stops 30 seconds after
motion ceases.
To cancel Security Mode, set POWER to
OFF.
44 For assistance, call 1-800-211-PANA(7262)