Advertisement
Input Data
Sentence
-1
For autopilot
AGFPA, GGA, GLL, BWC,
RMA, VTG, ZDA, MTW, WPL,
TLL
For AP + RADAR
BWR, GGA, GLL, MTW, RMA,
RMB, RMC, WPL, TLL, VTG,
ZDA
For Navaid
GGA, GLL, MTW, RMA, RMB,
RMC, VTG, BWR, WPL, TLL,
ZDA
3) "External Device" selection
Select a connected navigation equipment; autopilot, remote
display or external navigation equipment.
Setting for DGPS Beacon Receiver
Set the DGPS MODE to the ON position using arrow keys and set
the following items, by referring to the specifications of the DGPS
beacon receiver.
1) DGPS MODE
2) RTCM Version
3) Byte Format
4) First Bit
5) Parity Bit
Temperature Offset
Enter an offset value if the water temperature reading is deviated
from the true value.
Water Depth Offset
Depth reading is based on the transducer position fitted on the
boat's hull. If a depth reading relative to water surface is required,
enter boat's draft depth between water surface and the hull.
6) Stop Bit
7) Bit Rate
8) Baud Rate
9) DGPS Level
Speed
Source
Normal setting is "GPS". If you want to display ship's speed
(water tracking) measured by an optional speed sensor instead of
ground speed measured by the GPS receiver, select "Speed
Sensor."
Speed Correction
Enter a correction value if speed reading is deviated from the true
value. This correction is effective only for an optional speed
sensor.
25
Advertisement
