Honda EM6000GN Manual page 9

I
I
I
j
HONDA
EMSODOGN
• Engine does not stop when the engine oil is insufficient .
1. Connect the yellow wire of the oil alert unit
r-------~
side to the engine ground.
Perform spark test [P.2-9 of base shop
manual (62ZPOOO)).
--~---,;---m----
Oil ALERT
UNIT
2. Connect the black/yellow wire of the com-
t---------J~
bination switch to the engine ground.
Perform spark test IP.2-9 of base shop
manual (62ZPOOO)).
BLACK/YEllOW
WIRE
(From
combination
switch)
• Before proceeding, drain the engine oil.
No spark
No spark
Sparks
Faulty oil level switch.
• Replace the oil level switch [P.12-1 of base
shop manual (62ZPOOO)).
~
, I't"-..--:=t
I
YEllOW
WIRE
Faulty oil alert unit.
• Replace the oil alert unit.
Open circuit in black line between the combi-
nation switch and ignition coil.
• Re lace the black wire.
3. Connect the black wire of the ignition coil
to the engine ground.
Perform spark test IP.2-9 of base shop
manual (62ZPOOO)).
"7~-BlACK
WIRE
(From ignition
coil)
See IGNITION SYSTEM troubleshooting (P.2-7).
2-6