Table of Contents
Advertisement
30
en | Configuration
Cartesian
The Cartesian coordinate system describes each point in the space by a combination of the
position on three orthogonal axes X, Y and Z. A right-handed coordinate system is used,
where X and Y span the ground plane and Z describes the elevation of the ground plane.
X [m]
The location of the camera on the ground on the X-axis.
Y [m]
The location of the camera on the ground on the Y-axis.
Z [m]
The elevation of the ground plane. To determine the elevation of the camera, add the Z [m]
value and the Height [m] value of the camera.
Azimuth [°]
The orientation of the camera in a counter-clockwise angle starting with 0° in the east (WGS
84) or on the X-axis (Cartesian). If the camera is directed towards the north (WGS 84) or
the Y-axis (Cartesian), the azimuth is 90°.
WGS 84
The WGS 84 coordinate system is a spherical coordinate system description of the world
and used in many standards including GPS.
Latitude
Latitude is the north-south position of the camera in the spherical coordinate system WGS
84.
Longitude
Longitude is the east-west position of the camera in the spherical coordinate system WGS
84.
Ground level [m]
The elevation of the ground above sea level. To determine the elevation of the camera, add
the Ground level [m] value and the Height [m] value of the camera.
Azimuth [°]
The orientation of the camera in a counter-clockwise angle starting with 0° in the east (WGS
84) or on the X-axis (Cartesian). If the camera is directed towards the north (WGS 84) or
the Y-axis (Cartesian), the azimuth is 90°.
Click Set to apply the changes.
5.4.4
Color
Brightness (0...255)
Adjust the brightness with the slider from 0 to 255.
Contrast (0...255)
Adjust the contrast with the slider from 0 to 255.
Saturation (0...255)
Adjust the color saturation with the slider from 0 to 255.
White balance
Select the appropriate white balance mode from the drop-down list.
–
–
2024-02 | V01 | DOC
Basic auto mode allows the device to continually adjust for optimal color reproduction
using an average reflectance method. This is useful indoor light sources and for colored
LED light illumination.
Standard auto mode allows the device to continually adjust for optimal color
reproduction in an environment with natural light sources.
User manual
DINION 3100i IR
Bosch Security Systems B.V.
Advertisement
Table of Contents
