Table of Contents
Advertisement
DINION 3100i IR
–
Camera LED
Click the Enabled or Disabled check-box to switch the Camera LED on or off.
Select Auto disable to let the camera determine when the LED should be switched off.
The camera LED activates when powering on the camera for the first time. The LED
deactivates automatically after 5 min.
Reboot device
Click the Reboot button to restart the device. The entire reboot sequence takes
approximately 60 seconds.
Restore settings
Click Restore to restore all settings, except network settings, to their defaults.
Note: Clicking this button also clears the service-level password. Operators must reset the
password before doing anything else.
Factory defaults
Click Defaults to restore all settings, including passwords and network settings, to their
defaults.
Note: Clicking this button also clears the service-level password. Operators must reset the
password before doing anything else.
5.4.2
Display Stamping
Various overlays or stamps in the video image provide important supplementary information.
These overlays can be enabled individually and arranged on the image in a clear manner.
The drop-down menus below allow the configuration of the individual stamping options. The
respective sample windows show a preview of the configured text and background styles.
Click Set to apply the changes.
Global configuration
Notice!
i
These options can also be configured individually for all stamping settings.
Any changes to the global configuration settings will be applied to all stamping settings!
–
Select the desired font size of the overlays on the OSD: Normal, Large or Custom.
Select Custom to enable the Font size (‰) field.
–
Select the color for the alarm message to be displayed in.
–
Select the background color for the alarm message to be displayed in.
If you have enabled the Transparent background option, the background color is not
displayed in the OSD.
Bosch Security Systems B.V.
IR-corrected lens
–
Click the checkbox to activate or deactivate IR correction function.
The setting of the lens mode is crucial to ensure optimal performance. In daylight
operation, the IR-corrected mode is not required. In dark environments where the
majority of light is provided by the IR illuminators, the lens should be set to IR-
corrected mode. Otherwise, if sufficient ambient light is available, disable the IR-
corrected mode. An incorrect lens setting could result in improper focusing.
Stamping size
Text color
Background color
User manual
Configuration | en
25
2024-02 | V01 | DOC
Advertisement
Table of Contents
