Table of Contents
Advertisement
DINION 3100i IR
1
Safety and security information
Read, follow, and retain for future reference all of the following safety instructions. Follow
all warnings before operating the device.
1.1
Safety message explanation
In this manual, the following symbols and notations are used to draw attention to special
situations:
Danger!
Indicates a hazardous situation which, if not avoided, will result in death or serious injury.
Warning!
Indicates a hazardous situation which, if not avoided, could result in death or serious injury.
!
Caution!
Indicates a hazardous situation which, if not avoided, could result in minor or moderate
!
injury.
Notice!
i
Indicates a situation which, if not avoided, could result in damage to the equipment or
environment, or data loss.
1.2
Safety precautions
Caution!
Installation should only be performed by qualified service personnel in accordance with the
!
National Electrical Code (NEC 800 CEC Section 60) or applicable local codes.
Caution!
The product must be supplied only by an external source having an output complying with
!
PS2 or Annex Q conform to IEC 62368-1 and UL62368-1.
1.3
Important safety instructions
–
–
–
–
–
–
–
Bosch Security Systems B.V.
To clean the device, do not use liquid cleaners or aerosol cleaners.
Do not install the device near any heat sources such as radiators, heaters, stoves, or
other equipment (including amplifiers) that produce heat.
Do not spill liquids on the device before installation is completed.
Take precautions to protect the device from power and lightning surges.
Adjust only those controls specified in the operating instructions.
Operate the device only from the type of power source indicated on the label.
Unless qualified, do not attempt to service a damaged device yourself. Refer all
servicing to qualified service personnel.
User manual
Safety and security information | en
2024-02 | V01 | DOC
5
Advertisement
Table of Contents
