Color - Bosch Dinion2X Installation And Operation Manual

74 en | Advanced Mode
from each exposure are mixed to give a more detailed
image (use 2X Dynamic when SmartBLC is not required).
– Smart BLC: BLC window and weighting factor are
automatically defined. Camera dynamically adjusts these
for changing light conditions. Includes all the benefits of
2X Dynamic.
Auto black
Auto black ON automatically increases the visibility of details
even when scene contrast is less than full-range due to mist,
fog, etc.
Sharpness level
Adjusts the black level between -15 and +15. Zero position of
slider corresponds to the factory default black level.
A low (negative) value makes the picture less sharp. Increasing
sharpness brings out more detail. Extra sharpness can enhance
the details of license plates, facial features and the edges of
certain surfaces.
Dynamic noise reduction
In AUTO mode the camera automatically reduces the noise in
the picture. This may cause some motion blur on exceptionally
fast moving objects immediately in front of the camera. This can
be corrected by widening the field of view or selecting Off.
Peak white invert
Use Peak white invert to reduce glare from the CRT/LCD
display.
Use in ANPR/LPR applications to reduce headlight glare. (Test
on-site to ensure that it does benefit the application and is not
distracting for operators.)
9.6.6

Color

White balance
– ATW: Auto tracking white balance allows the camera to
continually adjust for optimal color reproduction.
– AWB hold: Puts ATW on hold and saves the color settings.
AR18-10-B006 | v1.1 | 2010.06
This manual downloaded from http://www.manualowl.com
Installation and Operation Manual
Dinion2X IP Camera
Bosch Security Systems