Sliders - Dcm 2500 PRO Manual

SLIDERS

The DCM SPREADER 2500 PRO comes with two different sliders:
Before using the spreader, choose the appropriate slider. The DCM SPREADER 2500 PRO is equipped
with the summer slider as standard. Follow the step-by-step instructions below to change the slider
if necessary.
If the application hole is fully open and the lever is set
at 20, tighten the screw with a screwdriver so that
the control rod (part 2) is secure.
Summer slider (3 holes): to spread fertilisers, use the slider
with the three holes as shown.
Winter slider (1 hole): to spread deicing salts and grit, use the
slider with one large hole as shown.
EN
43