Maintenance - Zanussi GC 21 M Instructions For The Use And Care

Maintenance
Check at regular intervals the condition
and serviceability of the gas connection
hose and pressure regulator, if any; in
case of malfunction, do not repair but
replace the whole faulty part.
To ensure a smooth and safe operation, it
is necessary to periodically grease the
gas taps.
Servicing should be carried out by
qualified personnel as follows:
remove the knobs and slide out the front
panel after removing the securing
screws.
Unscrew the two screws to be found
next to the gas tap shaft.
Slide out the cone and clean it
thoroughly; finally, apply a thin layer of
grease of a type non-soluble to
hydrocarbons and suitable for gas taps.
Make sure that no excess grease
obstructs the gas tap holes.
Refit everything very carefully reversing
the above procedure.
19