Panasonic KX-W50TH Service Manual page 6

t
CORRECTION
SHAFT
ASSEMBLY
Fig. 3-6
CARRIAGE
- MOTOR BRACKET
ASSEMBLY
Platen Removal (Fig. 3-8)
1 )
Remove the E-ring
®
from the shaft of the platen assembly.
2 )
Slide the platen bushing from the platen shaft.
HEAD FLEX
HOLDER B
Fig. 3-7
0
3 )
Remove the E-ring
®
from the platen middle gear shaft .
4
)
Slide the platen assembly, platen middle gear and platen bushing to the left of the frame, then lift the platen
assembly from the frame.
NOTE: Assemble in the reverse order.
,E-RING @
PLATEN SHAFT
/
PLATEN BUSHING
PLATEN BUSHING
PLATEN ASSEMBLY
PLATEN MIDDLE GEAR
Fig 3-8
-8 -
Carriage Disassembly
(1) Remove the two screws and then the align scale. (Fig. 3-9)
(2) Remove the two E-rings from the cassette holder shaft , and then lift the cassett e holder up. (Fig . 3-9)
(3) Remove the head flex holder A by pulling in the direction of the arrow . (Fig . 3-11)
(4) Unhook the head spring , and remove the head holder and thermal head assembly. (Fig . 3-10)
(5) Remove the three screws and then the carriage cover. (Fig. 3-10)
ALIGN
SCALE
C:=:)c:=:,c:==::>
THERMAL HEAD
ASSEMBLY
C:=:) c::::::, c::::::,
□
□
CASSETTE
HOLDER
ASSEMBLY
HEAD HOLDER ------------ E-RING -----------
ASSEMBLY
Fig 3 - 9
HEAD HOLDER
ASSEMBLY
THERMAL HEAD
ASSEMBLY
Fig 3-10
CARRIAGE COVER
CARRIAGE
~~
J15u (
HEAD FLEX ;
......-----i
HOLDER A •
Fig 3-11 (REAR VIEW)
- 9-