Advertisement
Blind Nut Installation
Blind Nut Installation
For hollow metal frames, use blind nuts provided for reinforcement.
1
Blind Nut Assembly
Washer
Hex screw
Installation tool
4
This compresses the blind nut so that it
remains permanently fixed in the hole.
Surface Mount
Surface Mount
Surface Mount
Double action
metal door
Glass Door Mount
Glass Door Mount
Frameless Glass Door
Double action
glass door
GS250VGL consists of GS250
shear lock, SMB-300 (a pair of
housings) and UBK-182 (a pair
of brackets). Suitable for full
frameless glass door and wall
of 10~13 mm thickness.
Copyright © All rights reserved. P-MU-GS250 Published on: 2024.01.16
2
Blind nut
Nut
Drill a 9.4mm hole and hammer the
blind nut assembly into the hole.
5
Remove the installation tool from the
blind nut. Repeat step 2 through 4 for
the other blind nuts.
Magnet
Assembly
Frame
Metal
Jamb
Armature
Assembly
Out
In
Frameless
Glass wall
Frameless
Spacer
Glass Door
Out
In
3
Use a wrench or vice-grip to tightly hold
the nut. Then use the included Allen
wrench to slowly tighten the screw until
it does not turn any further.
6
Semi-surface Mount
Double action
glass door
For semi-flush mount, only one of the SMB-300 housing brackets is required
(for the armature plate side). The magnet is mortised into the frame.
M6 Screw
Blind Nut
Use M6 screws to secure the
SMB-300 brackets.
GS250
Frame
Jamb
SMB-300
Out
In
4-3
Advertisement
