Table of Contents
Advertisement
=>
working.
e The display will return to the function list.
To return to the stand-by mode, press
or wait for 60 seconds.
e If 3 beeps sound, the entered date/time is
not correct. Start from step 4.
uone
6 Press (SEND/SET) (Save key).
Date:1999.01.05
Time:09:30
PM
e A long beep sounds and the clock starts
s When you enter the hour in step 4, you cannot enter numbers greater
than 12. Do not use military time. (To set 13:00, enter "0100" and select
"PM" by pressing (1).)
e The accuracy of the clock is approximately +45 seconds a month at room
temperature.
If a power failure occurs or the AC adaptor is disconnected for more
than 30 minutes, the adjusted date/time will be erased.
For Caller ID service users (p. 26)
e The date and time will be adjusted by the incoming Calier ID
information after the first ring. In this case, the year will not be
adjusted. To adjust the year, follow steps 1 to 3 on page 18. Enter the
current year by using a 4-digit number, then press (SEND/SET).
e The Caller ID information will re-set the clock if the adjusted time
and/or date is incorrect.
e The Caller ID information will automatically set the clock ahead at the
beginning of summer and back at the beginning of winter.
19
Advertisement
Table of Contents
