Listening To Voice Mail - Panasonic KX-TG7622B Operating Instructions Manual

If you are not sure which setting is
required, contact your service provider/
telephone company.
Turning VM tone detection on/off
The default setting is "On".
1
MMENUN#332
2
MbN: Select the desired setting. a
MSAVEN a MOFFN

Listening to voice mail

messages
The unit lets you know that you have
new voice mail messages in the
following ways:
– "New Voice Mail" is displayed on
the handset and base unit
message indication service is
available.
– The message indicator on the
handset flashes slowly if the message
alert feature is turned on ("Message
alert", page 63).
*1 KX-TG7641 series: page 3
Handset
1
MMENUN#330
R The speakerphone turns on.
2
Follow the pre-recorded instructions.
3
When finished, press MOFFN.
*1
Base unit
*1 KX-TG7641 series: page 3
To listen to voice mail messages, you
have to dial your voice mail access
number manually.
Note for handset and base unit:
R If the handset and base unit
indicate there are new messages
even after you have listened to all
new messages, turn it off by pressing
and holding # until the handset or
*1
base unit beeps.
For assistance, please visit http://www.panasonic.com/help
R If your voice mail service uses voice
R If your voice mail service uses voice
*1 KX-TG7641 series: page 3
*1
if
*1
still
Voice Mail Service for Landline
mail tones and a message is over 3
minutes long, the unit may not
indicate new messages.
mail tones, the tones are heard from
any phone connected to the same
line. If you want to use another phone
to listen to voice mail messages, you
have to dial your access number
manually.
65