Table of Contents
Advertisement
{Į Setting the Print Quantity
Before shooting, you can set the number of prints you want to have made
of that shot. This saves the trouble of ordering reprints later, and is handy
when you don't want to print shots that did not turn out right.
Turn the Mode Dial to 1X
Display the (4 icon.
*Press the MODE button until the icon
appears,
Select the number of prints you
want,
*Turn the electronic dial to select the
number of prints.
*You can select from 0 to 9 prints of
any shot.
Turn the Mode Dial to a shooting
mode, and shoot the picture.
+ After the shot, the print quantity
setting is canceled.
Fj] "170% do not designate a print quantity, the default of 1 wil be applied for
color negative film, 0 for color reversal (slide) film, or 1 for monochrome film.
* Continuous print quantity settings are not available.
+The print quantity setting may not be effective at some photo labs.
81
Advertisement
Table of Contents
