Table of Contents
Advertisement
Loading the Film
Your camera uses 1X240 cartridge film. Do not use 135 (35mm) film.
Open the film compartment cover.
+ Raise the film compartment cover
latch and turn it clockwise to open
the cover.
Drop in the film cartridge.
*Drop the cartridge in with its visual
exposure indicator facing upward.
Close the film compartment cover,
+ Press the cover in the direction of the
arrow until you hear it click into place.
The latch automatically returns to its
position.
+The film then winds automatically.
*The LCD panel shows the film
cartridge icon, film sensitivity, and
number of frames.
+The frame counter displays a "1" to
show that the film is set to the first
frame.
* Be sure to load a cartridge with a status mark of © (unexposed) or D
(partially exposed). If the film is not loaded properly, the @ indicator will
flash, and you will need to remove the film and reload it properly.
Q
j"
the @ indicator will flash.
* If you load a cartridge with an exposed € or processed O status mark,
Advertisement
Table of Contents
