Table of Contents
Advertisement
Focusing Point Selection
The focusing point is the frame within which your camera focuses. The focusing point
can be selected automatically or manually. In Full Auto mode, any of the Image Zone
modes, or ADEP mode, only automatic selection is available. In P, Tv, Av, or M
mode, you can switch between selecting frames automatically or manually.
Auto Focusing Point selection:
The camera automatically selects the focusing point according to shooting conditions,
and focuses the shot. This is best when you just want to take simple snapshots.
Manual Focusing Point selection:
You can also choose which of the three focusing points you want to focus on. This is
handy when you want to be sure you are focusing on a particular subject, or when you
want to better control the shot's composition while using the speedy focusing function.
Press the focusing point selector.
e The corresponding focusing point
appears in the LCD panel.
*The focusing point selection stays on for
approximately six seconds, even if you
take your finger off the button.
Select the focusing point you want to
use.
* Watch the LCD panel or the viewfinder
display as you turn the electronic dial to
select the focusing point you want.
Automatic AF selection:
Ged
Left focusing point selected:
oJ
Center focusing point selected:
C +1
Right focusing point selected:
C 4
* The setting cycles through the above
selections in the order shown.
* You can cancel manual AF
Tame calaslion end takin
Press the shutter button halfway.
ihg-eaniera'to'automaliAF
+The camera returns to ready-to-shoot mode.
frame selection by turning
e The selection stays on for approximately six
the Mode Dial to Full Auto
seconds, even if you take your finger off the
or any Image Zone position.
button,
I
Advertisement
Table of Contents
