Table of Contents
Advertisement
E-TTL Automatic Flash with on EX Series Speedlite
Place the subject in the center of
the viewfinder and press the FE
lock button.
«The Speedlite pre-flashes to
"memorize" the necessary exposure
for the subject.
+The shutter speed indicator in the
viewfinder briefly changes to "FEL."
elf the $ icon in the viewfinder is
flashing, the subject is outside the
flash exposure compensation range,
and the exposure will be too dark.
Move closer until the $ icon no
longer flashes when you press the
FE lock button,
+The camera retains the proper
exposure setting for approximately 16
seconds after you take your finger off
the shutter button.
Shoot the picture.
ECE,
ir "If you are using an external flash unit, press the built-in flash back into place
before connecting the external flash.
* When you use an external flash with Basic Mode Zone, the settings are the
same as in P (Program AE) mode, and the flash operates on all shots
* Other than the EX series exclusive EOS Speedlite, you can use this camera
with other exclusive EOS Speedlites (540EZ, 430EZ, 420EZ, 300EZ etc.,
including multiple-light accessories) for simple, easy flash photography with
3-zone A-TTL/TTL automatic flash exposure control, and the same feel as
normal fully automatic shooting.
k
Advertisement
Table of Contents
