Hitachi DZ-MV270A Instruction Manual page 96

Hide thumbs Also See for DZ-MV270A:
Table of Contents

Advertisement

• Connecting
DVD video
camera/recorder
to PC via PC connection
cable
Use the PC connection cahle st/pplied with tile DZ WINPC3(W) optional PC kit to connect the DVD
video camera/recorder
to a PC that has been turned off, as shown in tile following illustration:
To PC connection
terminal
Note:
Use the USB device
driver provided
with the
DVD
video
camera/recorder,
not
with
the
DZ-WlNPC3(W),
Note:
When
connecting
this DVD video
camera/
recolder
to PC, you can also use a mini-USB B con-
nector
5-pin
type
cable
that
is compatible
with
USB20
(generally
available),
as well as the
PC
connection
cable
Note:
The PC connection
cable
does not supply
power
to the DVD video camera/recorder
Use the
AC adapter
to power
tire DVD video
camera/e-
corder
Note:
The PC connection
ca ble supplied
with the
DZ-WINPC3(W)
optional
PC kit is to be exclusively
used with the DVD video camera/iecolder:
A gen-
erally available
USB cable
cannot
be used
Note:
Befole
connecting
DVD video
camera/ie-
corder
to PC, disconnect
any other
cables,
such
as AV input/output
cable,
flora
tire
DVD video
camera/recorder
Note:
If you connect
this DVD video
camera/ie-
corder
to PC, nothing
will appear
in the viewfinder
or on the LCD screen
Tire CHARGE/ACCESS
indi-
cator
will
blink
only
while
the
disc
is being
accessecl
Note;
If you
wish to transfer
data
lecorded
on
DVD-R disc with this DVD video
camera/reeolder
to PC, finalize the DVD-R disc (see page
89)
Note:
After
transferring
the data
on disc to PC,
keep the original
disc as your backup
Note:
When
capturing
for PC the video
data
in-
put fiom another
AV device
and _ecorded
on disc
in DVD video
camera/_ecorder,
note
that
data
may not be played
back
correctly
Note:
The DVD
video
camera/iecorder
con-
nected
to PC should
be used at nomal
room tem-
perature
Note:
Note
that
Hitachi
does not guarantee
op-
eration
in the following
cases:
• If connection
is made
using a cable
other
than
that
supplied
with tire DZ-WINPC3(W)
PC kit
Note:
Connect
the DVD video
camera/recorder
to PC and use it at _om
temperature
Note:
Take care
that the temperatue
of this DVD
video
camera/recorder,
when
connected
to PC,
does
not rise excessively
(r efelence
for usage:
approx
30 minutes
at about
86_F(30_C)
Note:
If you use a PC equipped
with
DVD-RAM
drive,
change
the provided
UDF file system to tire
UDF2 01 file system included
in the DZ-WINPC3(W)
PC kit
Note:
If the DVD video
camera/iecorder
is con-
nected
to the USB11 port of PC, the data
transfer
speed
will be lower than
when
it is connected
to
USB20 port
96

Advertisement

Table of Contents
loading

Table of Contents