Inserting And Ejecting Disc; Inserting Disc - Hitachi DZ-MV270A Instruction Manual

Inserting and Ejecting Disc
Inserting Disc
With this DVD video c'amera/rerorder the rerorded video and audio are stored on DVD RAM* o1"DVD R disc.
* When using an uninitialized DVD RAiVl disc, it nlust be formatted (see p. 87).
| Make sure that the
DVD video camera/
recorder is turned off.
Set the power switch to
" POWER OFF".
117
Press down tile DISC
EJECT hutton.
The cover of disc
insertion block (hand
strap) will slightly
open.
3 Gently open tile
cover by hand
until it stops.
Power switch
DISC EJECT button
Insert tile disc, in cartridge o1"caddy, into tile
4 disc guide.
Set a both side recordable disc into tile disc guide
so that the label of side on which yon want to
record times tile hand strap.
How to set both-side recordable disc
• Tile actual recording surfhce of side [AI is op
posite to that on which "SIDE A" is marked. If
you view tile image recorded on side [AI on
another device, set tile disc in it with indica
tion "SIDE A" timing up.
• Tile cartridge has a fixed orientation when it
is inserted into tile DVD video camera/re
corder: Insert it correctly re%rring to the illus
tration shown below.
To record on side
IBI,
turn tile cartridge ovei:
How to set one-side recordable disc
• Set the disc with tile label side up in tile caddy,
and then insert tile caddy correctly referring
to the illustration shown below.
Tile caddy has a • mark: Insert it with this
mark fbrward.
37