Table of Contents
Advertisement
Basic lechniques
This section explains about recording
of movies and still images, and also basic settings on DVD video
camera/recorder.
Basic Handling
of DVD video
camera/recorder
Turning DVD Video Camera/Recorder
On
While
holding
down
the red
button
at tile center
of power
switch,
turn
the
switch
to set
it to
"_" VIDEO"
or " _
PHOTO".
Note:
When
power is turned on, the self-diagnosis
function
of DVD video camera/iecorder
may work,
and some
message
may appear
If any message
appeals,
refer to "Trouble
Messages"
(p 99)
/F _I
Power
switch
Opening
LCD Monitor
If you open the LCD monitor,
you can monitor
subject image on the LCD screen. If the monitor
is open,
the viewfinder
will be off.
Press
the OPEN hutton to open tile LCD monitor.
Tile LCD monitor
carl he opened
tip to approxi
mately
90° .
If the LCD monitor
is open 90 °, it can be tilted
with screen down as much as 90° , and can also
he tilted with screen tip and turned tip to 1800 so
the screen faces in the same dilvction
as the lens.
Tilt the LCD monitor
to adjnst its vertical
angle
so that yon carl see the screen easily.
Note:
Be sure to open
the LCD monitor
appoxi-
mately
90 _ before
changing
its vertical
angle
Note:
Do not record for a prolonged
time with the
LCD monitor
turned
approximately
180 _ in close
contact
with
the
DVD
video
camera/recorder
body:
Doing this could
cause the DVD video
cam-
era/recorder
and LCD monitor
to become
hot
OPEN
button
4O
Advertisement
Table of Contents
