Table of Contents
Advertisement
15
Did the following appear on your screen?
The currently configured total base memory
size is not valid for use with the AT/370 cards.
Do you want to change this configuration? (Y/N)
YES - Press Y, then press the Enter (
+.J )
key.
The total base memory size
configuration is reset to 640K bytes by
the diagnostic code and POST restarts.
(Base Memory size MUST be set to
640 K bytes when the AT/370 adapter
is installed.)
Return to step 9 on page 4-9.
Note:
If
you have already
attempted to change the total base
memory size and the preceding
error message displays a second
time, go to "Further Diagnostic
Testing Required" on page 4-24.
NO -
Go to step 16 on page 4-16.
Problem Determination Procedures 4-15
Advertisement
Table of Contents
