IBM AT/370 Manual To Operations page 48

8
When the DOS prompt (A>) appears on the
screen, type:
FDISK
then press the
Enter(~)
key.
You can now partition your fixed disk for DOS.
A selection screen displays.
9
Select
Create DOS Partition
then press the
Enter(~)
key.
10
A
second screen displays with the question:
"Do you wish to use the entire fixed disk for
DOS (Y /N) ............. ?"
Press Y, then press the
Enter(~)
key.
11
With the DOS diskette in drive A, press any key
to continue.
When the DOS prompt (A>) appears on the screen,
your entire fixed disk is partitioned for DOS.
Proceed with "Formatting and Transferring" on page
3-13.
3-12 AT/370 System Setup